HexMesh

Our Hex mesh provides another option for those preferring to use a Fast Melt type mesh. It has a slightly larger hole size which enables the water to penetrate quicker than our Micromesh products, thus allowing flavours to disperse more quickly. It is the perfect mesh for use with pellets; it too is completely anti-ladder and can withstand casts of extreme force. This particular Hex Mesh is the only one available with a 2.7mm hole; others available on the market today tend to be between 3mm and 4mm. As with our Micro Meshes, our Hex Mesh is available in 3 widths; 36mm (Standard), 26mm (Boilie) and 15mm (Skini). It has an approximate breakdown time between 30-45 seconds, although this too varies depending on several factors including water temperature. 

                                                                                                      SLOW MELT

Our slow Melt mesh is generally accepted to be the strongest, most versatile and effective PVA mesh on the market today. Its very clever construction enables the angler to use it with all manner of baits, from pellets to ground-baits and even including maggots. This mesh, which is made from slightly thicker material than usual, is extremely versatile in all angling situations. It is especially effective when fishing in extreme situations such as in very deep gravel pits or in very warm conditions where water temperatures exceed 14°C. In these situations, you need to be sure that the bait reaches the bottom before dispersing. The angler also has the advantage of being able to make up mesh bags in advance for their session. This mesh is our Best Seller due to its versatility. It is completely anti- ladder and capable of withstanding casts of extreme force. It is available in 3 widths; 36mm (Standard), 26mm (Boilie) and 15mm (Skini). Our Slow Melt Micromesh has an approximate breakdown time of between 1-2 minutes, although this varies depending on several factors including water                                                                                        

                                                                                                         FAST MELT

As its name suggests, our Fast Melt Micromesh is a Faster Melting PVA, using the same revolutionary design construction as our Slow Melt product, but using thinner material for those who prefer the ‘instant breakdown’ effect. This is particularly suitable for those people fishing areas of more normal depth. It is also ideal for those who wish to add extra attractants to their bags by ‘glugging’ them in oils or flavours (note: ‘glugging’ can decrease breakdown time over and above times recorded for untreated mesh). The Fast Melt mesh is most efficient in extreme cold water temperatures making it the ideal choice for winter sessions. We recommend this mesh for water temperatures below 8°C.  As with our Slow Melt range, our Fast Melt PVA mesh is ladder resistant and capable of withstanding casts of extreme force. It too is available in 3 widths; 36mm (Standard), 26mm (Boilie) and 15mm (Skini). Our Fast Melt Micromesh has an approximate breakdown time of between 30-45 seconds, although this varies depending on several factors including water temperature.

                                                                                                   SOLID TUBE

This enables you to easily fill and manufacture bags to any desired length. The PVA is super tough Unlike some, SCR Solid Tube will not split on casting impact and you have an average of 15 seconds to manoeuvre them accurately onto your feeding hot spot. Use a heat sealer to seal and cut the bag, producing minimalistic waste and no reliance on knot strength.